Wireless Radio Receiver With USB Interface
Converts wireless signals to serial data. When connected to a computer, it acts as an IoT hub for virtually unlimited JemRF wireless devices. The USB IOT Gateway works on both Windows 10 and up, as well as a Linux-based OS such as the Raspberry Pi and Orange Pi computers.
Features:
- Simple plug-and-go radio module for any computer with a USB-A port.
- Communicates with our radio wireless sensor modules
- TTL UART to USB interface built-in
- Default 9600 Baud
- Fitted with wire whip antenna
- Operates the same as the IOT Gateway for the Raspberry Pi
- USB 1 M cable to IOT Wireless Gateway Receiver
- Existing PEP Python 3 software works on Windows with Python 3.11.4 or higher just change the serial port and start receiving.
- Provides RSSI (Received Signal Strength Indicator) to show signal strength for each sensor.
Product Tutorial:
- IoT Gateway For Raspberry Pi Tutorial
Technical Specs:
- All devices are based on the high-performance RF transceiver using the market-leading CC1100 SOC.
- IOT Receiver Powered by USB-A
- Up to 1KM line of sight. Short-range (30M) penetration of walls and floors.
- 128-bit AES encryption security.
- Driver-less installation.
- All the devices are highly configurable through the serial port or over the air using the LLAP messaging protocol specified in the manual.
- The base station communicates through USB-A port (TTL UART).
- Communicates in ASCII clear text making it very easy to exchange data between devices over the air.
- Supports point-to-point, point-to-multi-point, multi-point-to-point and multi-point-to-multi-point.
- A virtually unlimited amount of devices can be deployed. 99,999 Personal Area Network ID’s, 10 channels per frequency and 7,744 Device ID’s per network.
- Supports six frequencies (433 MHZ, 915 MHZ (default US & Canada), 868.3 MHZ (default Europe), 868 MHZ, 903 MHZ, 315 MHZ)
- Ten channels per frequency.
