DIY Alarm Kit - Motion sensor, door contacts, temperature, buzzer siren

DIY Home Alarm Kit for Raspberry Pi 

Kit includes:

• 1 Motion Sensor
• 2 Door sensor switches
• 20 male/male jumper wires
• 10 male/female jumper wires
• Solderless Breadboard 400 Tie Points
• 8 resistors (3x10kOHM, 4x1kOHM, 1x4.7kOHM)
• 1 DS18B20 Dallas 1 wire digital temperature sensor
• 1 Active Buzzer (2,500 hz 3-5V)
• PN2222A Switching transistor

Kit excludes, but the PrivateEyePi project requires:

• A RaspberryPi, model A or B (visit http://www.raspberrypi.org for more details)
• Power supply for the RaspberryPi
• SD memory card for the power RaspberryPi
• Internet access to the Raspberry Pi (either via network cable or Wifi dongle, not included)

Tutorial
The detailed project tutorial can be found at http://www.projects.privateeyepi.com/home/home-alarm-system-project 

Alarm features:

• Connect door contacts or PIR sensors (motion sensors) to the Raspberry Pi.
• Receive email alerts when an alarm occurs.
• Monitor your home from your smart phone or computer using the dashboard featuring zone status (armed/disarmed/alarm), alarm dates and time as well as activity logs. You can also use the dashboard to arm and disarm zones.
• Monitor your home temperature from your dashboard.

Skill level for the PrivateEyePi project

• Basic low voltage electronic skills. We will provide you with a full inventory of electronic parts and diagrams. We will show you breadboard wiring schematics for you to copy.
• Basic Raspberry Pi and Linux experience. No programming or electronics experience required, no soldering. You can also use our blog to ask questions or email our support email.