Wireless Developer Board & Case
Wireless Developer Board & Case
Wireless Developer Board & Case
Wireless Developer Board & Case
Wireless Developer Board & Case
Wireless Developer Board & Case

Wireless Developer Board & Case

Regular price $9.95 Sale

Features:

  • 20-pin header for FLEX RF Module (Flex RF Module sold separately)
  • Breadboard style 70 thru hole prototyping area allows you to add your own sensors or actuators and connect to the FLEX RF module
  • The prototyping area has +VE and GND rails down the center and 6 rows perpendicular of 5 connected thru holes
  • Power options are 1.5V, 3.3V and 5V through three different power converters:
    • 1.5V to 3.3V converts 1.5V from the onboard AA battery to 3.3V required for the FLEX RF Module, or 
    • 5V to 3.3V converts 5V from the onboard mini USB port to 3.3V required for the FLEX RF module. You need an external power supply via a USB cable for this option (e.g., an old phone charger)
    • 1.5V to 5V (sold separately) converts 1.5V to 5V for any sensors that require 5V. This converter will only supply the prototyping area, so you will also need the 1.5V to 3.3V converter to power the FLEX RF Module
  • The power rail voltage is set by bridging one of three SMD pads between the 10-pin RF module header (see picture for more details)
  • Conveniently attach a DHT22 (temperature and humidity sensor) or DS18B20 digital temperature sensor (both supported by the FLEX RF module) without any additional wiring
  • The PCB is mounted in the case via two supplied screws
  • The elegant cream-colored case
  • The case has vents to allow for environment monitoring (temperature, humidity
  • Case dimensions 2.91"(74mm) x 2.16"(55mm) x 1.10"(28mm)
  • When in deep sleep mode, the FLEX RF module will run for years on a single AA battery. When the module is fully awake, it will last a few days on an AA battery. See section 14 of the manual for more details.